The sleeve or muff coupling is designed as a

Answer is:

Hollow shaft

Explanation:

Muff Coupling / Sleeve Coupling is the simplest type of rigid coupling, consists of a hollow cylinder whose inner diameter is same as shaft. It is fitted over the ends of the two shafts by means of a gib head key. The power is transmitted from one shaft to the other shaft by means of a key and a sleeve or muff.

The sleeve or muff coupling is designed as a hollow shaft.

The sleeve or muff coupling is designed as a

For More KPCL AE Mechanical Question Paper - 2018 with Answer Key

For more MCQ's Click Here

94) In an isothermal process, the internal energy of gas molecules

Answer is:

Remains constant

Explanation:

Different types of thermodynamic processes are
1.Constant Volume process or Isochoric Process
2. Constant Pressure Process or Isobaric Process
3. Hyperbolic process
4. Constant Temperature process or Isothermal process
5. Adiabatic process or isentropic process
6. Polytropic process
7. Free expansion process
8. Throttling process

Constant volume process or isochoric process: When the gas is heated at a constant volume, its temperature and pressure will increase. Since there is no change in its volume, no external work is done by the gas. All the heat supplied is stored in the body of the gas in the form of internal energy. It may be noted that this process is governed by Gay Lussac law.

Constant pressure process or isobaric process: When the gas is heated at a constant pressure, its temperature and volume will increase. Since there is a change in its volume, the heat supplied is utilized in incresing the internal inergy of the gas, and also for doing some external work. It may be noted that this process is governed by Charles law.

Hyperbolic process: A process, in which the gas is heated or expanded in such a way that the product of its pressure and volume remains constant, is called a hyperbolic process. This process is governed by Boyle’s law.

Constant temperature process or Isothermal process: A process, in which the temperature of the working substance remains constant during its expansion or compression, is called a constant temperature process or isothermal process. This will happen when the working substance remains in a perfect thermal contact with the surroundings, so that the heat ‘sucked in’ or ‘squeezed out’ is compensated exactly for the mechanical work done by, or on the gas respectively. It is thus obvious that in an isothermal process there is no change in temperature and no change in internal energy.

Adiabatic process or Isentropic process: A process, in which the work substance neither receives nor gives out heat to its surroundings, during its expansion or compression is called an adiabatic process. This will happen when the working substance remains thermally insulated, so that no heat enters or leaves it during the process. It is thus obvious, that in an adiabatic process no heat leaves or enters the gas, the temperature of the gas changes, as the work is done at the cost of internal energy and the change in internal energy is equal to the work done.

Polytropic process: The polytropic process is also known as the general law of the expansion and compression of gases.

Free expansion process: A free expansion occurs when a fluid is allowed to expand suddenly into a vacuum chamber through an orifice of large dimensions. In this process, no heat is supplied or rejected and no external work is done. Hence the total heat of the fluid remains constant. This type of expansion may also be called as constant total heat expansion.

Throttling Process: when a perfect gas is expanded through an aperture of minute dimensions, such as a narrow throat or a slightly opened valve, the process is termed as throttling process. During this process, no heat supplied or rejected and also no external work is done. Moreover, there is no change in temperature, and so the total heat of the fluid remains constant.

95) If Hg is the gross or total head and Hf is the head lost due to friction, then net or effective head (H) is given by

Answer is:

H=Hg - Hf

Explanation:

96) The volumetric efficiency for reciprocating air compressors is about

Answer is:

70 to 90 %

Explanation:

Volumetric efficiency = (Swept volume/(clearance volume+swept volume)), swept volume is volume swept by piston in cylinder.
Clarence volume is about only 10-15% of total volume. So volumetric efficiency of engine could be more than 70%

97) Intercooling in gas turbines

Decreases net output but increases thermal efficiency

Increases net output but decreases thermal efficiency

Decreases net output and thermal efficiency both

Increases net output and thermal efficiency both

Answer is:

Increases net output and thermal efficiency both

Explanation:

For More KPCL AE Mechanical Question Paper - 2018 with Answer Key

For more MCQ's Click Here

The sleeve or muff coupling is designed as a

Hollow shaft

For More KPCL AE Mechanical Question Paper - 2018 with Answer Key

Related KPCL AE Mechanical Question Paper - 2018 with Answer Key

94) In an isothermal process, the internal energy of gas molecules

Remains constant

95) If Hg is the gross or total head and Hf is the head lost due to friction, then net or effective head (H) is given by

H=Hg - Hf

96) The volumetric efficiency for reciprocating air compressors is about

70 to 90 %

97) Intercooling in gas turbines

Increases net output and thermal efficiency both

For More KPCL AE Mechanical Question Paper - 2018 with Answer Key