The tool may fail due to
* cracking at the cutting edge due to thermal stresses
* chipping of the cutting edge
* plastic deformation of the cutting edge
The tool may fail due to
* cracking at the cutting edge due to thermal stresses
* chipping of the cutting edge
* plastic deformation of the cutting edge
The working of metals below their recrystallisation temperature is known as cold working. Most of the cold working processes are performed at room temperature. The cold working distorts the grain structure and does not provide an appreciable reduction in size. It requires much higher pressure than hot working. The extent to which a metal can be cold worked depends upon its ductility. The higher the ductility of the metal, the more it can be cold worked. It also increases tensile strength , yield strength and hardness of steel but lowers its ductility. The increase in hardness due to cold working is called work-hardening.
The cold working of metals is carried out below the recrystallisation temperature.
Muff Coupling / Sleeve Coupling is the simplest type of rigid coupling, consists of a hollow cylinder whose inner diameter is same as shaft. It is fitted over the ends of the two shafts by means of a gib head key. The power is transmitted from one shaft to the other shaft by means of a key and a sleeve or muff.
The sleeve or muff coupling is designed as a hollow shaft.