90 degree
60 degree
30 degree
100 degree
Clearance angle
Rake Angle
Point angle
Inclination
100 m/min
10 m/min
20 m/min
25 m/min
The tool should be set below the centre
The tool should be set above the centre
The tool should be set exactly at the centre
The tool should be set near to the centre
offsetting the tailstock
form tool plunging
swiveiling the compound slide
Combination of the lathe cross slide and the compound slide movement
For turning lengthy tapers with a small taper angle, the method of taper turning employed is offsetting the tailstock.