Can be used for milling cast iron
Feed drive can have a backlash
There are no restriction for using this milling method
Suitable for milling thin metal plates
Backlash eliminator is not required
Downward pressure during milling is high
Cutter wear is less
Suitable for milling thin plates
m / min.
mm / rev.
mm / sec.
mm / min.
Tightened after the overarm support is in place
Tightened before the arbor support is in place
Tightened with extra large leverage
Allowed to tighten on its own during spindle rotation
Sintered carbide
High speed steel
Ceramic
Stellite