Cutters are used in pairs to machine two opposite sides of the job at the same time
The cutters used for the operation should be kept in match pair
Different diameter cutters are used depending upon the profile of the job
Since the diameter of cutters is the same, the peripheral speed will be the same
Burr on arbor taper causes eccentric running of cutter
Play in the spindle bearing of a milling machine gives rough finish to the machined surface
'T' slots are provided on the milling machine table for clamping a workpiece or work holding devices
Machine vice is used to hold workpiece directly on the milling machine table
Hardness, toughness and resistance to wear
Hardness, brittleness and resistance to wear
Hardness, softness and resistance to wear
Hardness, flexible and resistance to wear
Cast iron and plastic
High speed steel and carbides
Mild steel and stainless steel
Carbon steel and nickel steel
Generally slitting saws are keyed with the arbor
Slitting saws are used with normal speed and feed like other cutters
In a 45 Degree single angle cutter, 45 Degree is the angle between the axis of the cutter and the slant cutting edge
Dovetail guideways can be milled by using a shank type single angle cutter