Inclined with the lathe bed at an angle equal to the angle of taper required
Inclined with the lathe bed one half of the angle of taper required
Still parallel with the lathe bed
Either 'A' or 'B'
No friction
Equal friction
Less friction
More friction
Dead Centre, as compared with the live centre, bears or resists more friction
The size of each jaw
The thickness of each jaw
The diameter of the body of the chuck
Width of the body of the chuck
The size of the three-jaw chuck is specified by the diameter of the body of the chuck.
80 rpm
159 rpm
192 rpm
318 rpm
Tool geometry
Surface finish required
Type of coolant required
All of the above